Case study · Austin

Cleaner, ready-to-fit door lock covers for the Austin 7 Ruby

An Austin 7 Ruby owner wanted a cleaner, more modern look for the door lock covers, without having to cut holes in brittle originals. We designed a new pair from the car’s own door lock plates.

Vehicle
Austin 7 Ruby
Part
Door lock catch covers, pair
Material
ASA
Process
Measure · CAD · 3D print
An original cover, cracked along one corner.
An original cover, cracked along one corner.

The part

On the Austin 7 Ruby, each door lock is mounted on a steel plate inside the door, and a small moulded cover fits over it to tidy up the mechanism. This customer asked us for a version with a cleaner, more modern look. Fitting the originals also takes work: the owner has to cut openings for the door hardware to pass through, and after more than 80 years the old covers are brittle and can crack as they are cut or screwed down.

The challenge

The new cover had to fit the car exactly as it is, with no cutting needed. It had to:

  • fit over the lock mechanism and screw to the existing holes in the door lock plate;
  • come with openings for the door hardware already in place, including the internal locking lever on the passenger side;
  • be tough enough to screw down firmly without cracking;
  • look clean and simple against the trim of a 1930s car.

Our approach

Measure the door

Measure the door

We measured the door lock plate and the hardware on the car itself: the screw hole positions, the size of the mechanism, and where each lever moves.

Design it in CAD

Design it in CAD

In professional CAD, we designed a clean new cover around those measurements, with the openings for the door hardware built in and a matching cover for each side of the car.

Test the fit

Test the fit

We printed test covers and checked them against an original lock plate, refining the fit before printing the final pair in black ASA.

Ready to fit

Ready to fit

The openings are part of the design, so the covers go straight on with no cutting, filing or drilling. To protect them in the post, they arrive screwed to a printed shipping plate (yellow) using the new screws supplied in the kit.

The new covers fitted to an Austin 7 Ruby’s door lock plates.
The new covers fitted to an Austin 7 Ruby’s door lock plates.

The result

A pair of door lock covers for the Austin 7 Ruby, printed in tough, UV-resistant black ASA, with a new set of mounting screws. Clean and simple, they fit straight onto the door lock plates.

Buy a pair

The covers are available as a pair in our eBay shop, with a new set of mounting screws. All our parts are made in our workshop near Cambridge, printed to order or in small batches rather than stockpiled.

Buy on eBay

Take it with you

The full two-page case study, with more photos and detail.

Download the case study (PDF)

Obsolete isn’t the end.

Got a part that can’t be replaced?

Send us a few photos of the part and tell us which vehicle it’s from. We’ll tell you what’s possible.

More case studies